Radio/Audio System Operation -Compact Disc Player (Remote Changer): Notes

Fig 1: Compact Disc Changer

Courtesy of GENERAL MOTORS CORP.

The disc icon appears on the VF display of the radio control whenever a magazine containing discs is loaded into the changer. The disc icon will flash while the player is checking for discs. The CD disc icon is located in the bottom left corner. The following appears on the display when a disc begins playing:

• The CD disc icon located in the bottom left corner
• The disc number
• The track number

Perform the following to play a compact disc in the remote CD changer:

1. Load discs into the magazine. Refer to Radio/Audio System Operation - Compact Disc Player (Remote Changer Magazine).
2. Insert the magazine into the CD player. Refer to Radio/Audio System Operation - Compact Disc Player (Remote Changer Magazine).
3. Turn the ignition to the ACCESSORY or ON position.
4. Turn ON the radio.
5. If radio is playing, press TAPE AUX (UL0) or CD AUX (UN0) to switch from radio play to playing a compact disc in the remote CD changer.
6. If cassette tape is playing, press TAPE AUX to switch from cassette play to playing a compact disc in the remote CD changer.
7. If the compact disc is playing (in the radio control UN0), press CD AUX to switch from compact disc play (UN0) to playing a compact disc in the remote CD changer.

The following controls will function as they do during radio operation once a disc is playing:

• PWR -VOL
• SCV
• BASS
• TREB
• BAL
• FADE
• AUTO TONE

Refer to Radio/Audio System Operation - Radio Controls.

Perform any one of the following procedures to stop play of a compact disc (CD) in the remote CD changer:

• Turn the ignition OFF. The disc will remain in the changer. The disc will resume play at the point where it stopped.
• Turn the radio OFF. The disc will remain in the changer. The disc will resume play at the point where it stopped.
• Press AM/FM to stop disc play and switch to radio (if no cassette or CD are loaded into the radio control).
• Press TAPE AUX 2 times to stop disc play and switch back to cassette play UL0 (if a cassette is loaded into the radio control).
• Press CD AUX 2 times to stop disc play and switch back to disc play into the radio control UN0 (if a disc is loaded into the radio control).