Remote Control Door Lock Receiver Replacement
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
If the remote control door lock receiver is replaced, the following procedures must be performed:
- Replace remote control door lock receiver (RCDLR) Module.
- Install Tech 2 and CANDI module.
- Select Service Programming System and follow on screen instructions. Refer to Service Programming System (SPS) .
- With Tech 2 enter Diagnostics and build vehicle with proper Year, Make, Model and Options.
- Select Body and Accessories.
- Select Keyless Entry.
- Select Module Setup, RCDLR.
- Select Program Key Fobs. Refer to Transmitter Programming .
- Set up a new remote control door lock receiver.
- Select Tire Type/Pressure selection.
- Perform Tire Pressure Sensor Learn mode-Refer to Tire Pressure Sensor Learn .