Scan Tool Data Definitions

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

The Body Control Module (BCM) scan tool data definitions are a brief description of each of the window related parameters displayed within the scan tool data displays for the BCM.

LR Window Down Cmd.: This parameter indicates the commanded state of the left rear window down function.
LR Window Enable Cmd.: This parameter indicates the commanded state of the rear window lockout function.
LR Window Up Cmd.: This parameter indicates the commanded state of the left rear window up function.
RR Window Down Cmd.: This parameter indicates the commanded state of the right rear window down function.
RR Window Enable Cmd.: This parameter indicates the commanded state of the rear window lockout function.
RR Window Up Cmd.: This parameter indicates the commanded state of the right rear window up function.

The Driver Door Switch (DDS) scan tool data definitions are a brief description of each of the window related parameters displayed within the scan tool data displays for the DDS.

Battery Voltage Signal: The scan tool displays 9.0-16.0 volts. This is the state of charge of the vehicle battery.
Driver LF Window Switch: This parameter indicates the current status of the left front window switch.
Driver LR Window Switch: This parameter indicates the current status of the DDS left rear window switch.
Driver RF Window Switch: This parameter indicates the current status of the DDS right front window switch.
Driver RR Window Switch: This parameter indicates the current status of the DDS right rear window switch.
Window Lockout Switch: This parameter indicates the current status of the rear window lockout switch.
Window Lockout Switch Indicator Command: This parameter indicates the commanded state of the rear window lockout indicator.

The Passenger Door Switch (PDS) scan tool data definitions are a brief description of each of the window related parameters displayed within the scan tool data displays for the PDS.

Battery Voltage Signal: The scan tool displays 9.0-16.0 volts. This is the state of charge of the vehicle battery.
Passenger Window Switch: This parameter indicates the current status of the right front window switch.