October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Side Object Sensor Replacement
WARNING: This page is about a different car, the 2014 Chevrolet SS. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of GENERAL MOTORS COMPANY Side Object Sensor Replacement
| Callout |
Component Name |
Preliminary Procedures
Remove the front bumper fascia. Refer to . Front Bumper Fascia Replacement |
| 1 |
Side Object Sensor Front Procedure
- Disconnect the side object sensor electrical connector.
- Release the locking tabs on the side object sensor .
- The side object sensor is a one piece design. Do NOT twist the sensor cap to try and remove the painted cap. Replacement sensor requires painting to match fascia/bumper body color.
- Ensure the paint does not exceed 6 mils. Use a paint thickness gauge suitable for non-ferrous metals.
NOTE:
Ensure the silicone decoupling ring is installed on the sensor to avoid sensor failure.
|