Circuit/System Verification
- Verify DTC P181C, P181D, P181E, P181F, P183A, P183B, P183C, P183D, P183E, P184A, or P184B is not set.
- If any of the DTCs are set
- If none of the DTCs are set
- Verify DTC P1824, P182A, P182B, P182C, P182D, P182E, P182F, P1838, or P1839 is not set.
- If any of the DTCs are set
Refer to DTC P1824, P182A-P182F, P1838, or P1839 .
- If none of the DTCs are set
- If any of the DTCs are set
- Verify that DTC P16F4 is not set.
- If the DTC is set
- Program the T6 Power Inverter Module.
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
- Verify the DTC does not set.
- If the DTC sets, replace the T6 Power Inverter Module.
- If the DTC does not set
- All OK
- If the DTC is not set
- All OK