Driver Information Center Messages
Adaptive Cruise Control Temporarily Unavailable
"Adaptive Cruise Temporarily Unavailable" service message may be displayed if the yaw rate sensor learn procedure (Multi Axis Sensor). If the service message is not resolved with the yaw rate sensor learn, the long range radar calibration procedure has to be performed. The radar may have become misaligned.
The active safety control module will send this message if the adaptive cruise control has been disengage or disabled. There are many reasons that can cause this, some will also set DTCs. Check vehicle for DTCs and also check the Adaptive Cruise Control Inhibit History and Disengage History scantool data. Definitions of parameters can be found in Active Safety Control Module Scan Tool Information .
Park Assist Temporarily Unavailable
This message sets if there is a problem with the park assist feature. Check vehicle for DTCs. Verify if the problem is with park assist only or if lane departure warning and adaptive cruise control are also inoperative. If all are inoperative, check the Adaptive Cruise Control Inhibit History and Disengage History scantool data for the reason for the malfunction. Definitions of parameters can be found in Active Safety Control Module Scan Tool Information .
Service Adaptive Cruise Control and Service Front Camera
The message is set if the Active Safety Control Module is not communicating to the instrument cluster. Check vehicle for DTCs.
Service Driver Assist System
This message can be set by either the Active Safety Control Module if there is a problem with the driver assist system or by the Memory Seat Module if there is a problem with the haptic seat circuits. Check vehicle for DTCs.