Symptoms - Object Detection: Notes
NOTE:
The following steps must be completed before using the symptom tables:
- Perform the Diagnostic System Check - Vehicle
before using the Symptom Tables in order to verify that all of the following are true:
- There are no DTCs set.
- The control modules can communicate via the serial data link.
Note: The rear vision camera does not communicate on the serial data bus.
- Review the system operation in order to familiarize yourself with the system functions. Refer to:
- Adaptive Cruise Control Description and Operation (with Adaptive Cruise Control, KSG)
- Active Safety System Description and Operation
- Active Safety Seat Description and Operation
- Cross Traffic Alert Description and Operation
- Forward Collision Alert Description and Operation
- Lane Departure Warning Description and Operation
- Parking Assist Description and Operation (with Front and Rear Park Assist, UD5) Parking Assist Description and Operation (with Rear Park Assist, UD7) Parking Assist Description and Operation (with Parallel Parking Assist, UFQ)
- Rear Vision Camera Description and Operation
- Side Blind Zone Alert Description and Operation