If Slow to Calibrate: Notes

The ideal calibration condition is driving on a 2 lane divided highway with markings on both sides of the lane. One or more of the following conditions may increase the length of time required to complete the self-calibration procedure:

• Heavy traffic
• Stop and go traffic
• Mountain roads
• Curves in roadway
• Poor contrast lane markings
• Botts' Dots type lane markings
• Operating the vehicle at speeds greater than recommended
• Driving through snow or fog or driving directly into the sun
• Camera not properly installed. Verify it is snapped into tabs and is secure. Refer to Front View Camera Replacement (With UFL) , Front View Camera Replacement (With UGN)  and Front View Camera Replacement (With UQT) .