Circuit/System Verification
- Ignition ON.
- Verify that DTC B1405 is not present.
- If the DTC is set
Refer to DTC B1405
- If the DTC does not set
- If the DTC is set
- Verify that DTC B096C 3A, B096C 3B, B096D 3A or B096D 3B is not set.
- If the DTC is set
Replace the appropriate sensor.
- If the DTC does not set
- If the DTC is set
- Verify that DTC B096C 22 or B096D 22 is not present.
- If the DTC is set
Check the appropriate sensor for contamination with mud, ice or snow. If no contamination is diagnosed, replace the appropriate sensor.
- If the DTC does not set
- If the DTC is set
- Verify that DTC B096C or B096D is not set.
- If the DTC is set
Check the appropriate sensor for contamination with mud, ice or snow. If no contamination is diagnosed, refer to Circuit/System Testing.
- If the DTC does not set
- If the DTC is set
- All OK.