Circuit/System Verification

Ignition ON.
Verify that no other DTCs are set except for DTC B1011.
- If any other DTCs are set
  Diagnose this first. Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- If no other DTCs are set
Verify the scan tool Frontview Camera Disable History 1 parameter indicates no current malfunction.
- If a current malfunction is indicated
  Diagnose the system that sets the malfunction. Refer to Diagnostic Aids.
- If no current malfunction is indicated
Verify the scan tool Frontview Camera System Status parameter is Normal.
- If not Normal
  Refer to Lane Departure Warning System Malfunction .
- If Normal
Verify the scan tool Frontview Camera Calibration Status parameter is Calibrated.
- If not Calibrated
  Calibrate the Frontview Camera Module. Refer to Front View Camera Module Learn .
- If Calibrated
All OK.