Video Processing Control Module Calibration: Notes

WARNING: This page is about a different car, the 2016 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Image will be slightly distorted at all times, the camera(s) lens is a fish-eye lens meant to capture as much as possible.

The calibration procedure is to have the Video Processing Control Module learn the new cameras and their positions. The calibration does not start automatically or if manual initialization is desired, calibration can be initiated by selecting Video Processing Control Module Camera Learn in the scantool.

Radio Display Prompt Example

Fig 1: Radio Display Prompt Example

Courtesy of GENERAL MOTORS COMPANY

The left side of the screen will display where the EL-51372 Camera Calibration Mat should be located for each step. The right side of the display is the view from the camera that is being learned during that step.

Mat Position Reference

Position A is the left front
NOTE: Not All Apply to each variant
Position B is the right front
Position C is the left rear
Position D is the right rear
Position E is directly in front of the car, centered side to side
Position F is directly behind the car, centered side to side