Fastener Specifications
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Intermediate Steering Shaft Inner Boot Nut | 9 N.m (80 lb in) |
| Intermediate Steering Shaft Lower Bolt | 50 N.m (37 lb ft) |
| Intermediate Steering Shaft Outer Boot Nut | 9 N.m (80 lb in) |
| Intermediate Steering Shaft Upper Bolt | 30 N.m (22 lb ft) |
| Mid Intermediate Steering Shaft Bolt | 30 N.m (22 lb ft) |
| Steering Column Lock Control Module Bolt- Rear | 9 N.m (80 lb in) |
| Steering Column Lock Control Module Bolt - Side | 9 N.m (80 lb in) |
| Steering Column Lower Trim Cover Bolt | 2.5 N.m (22 lb in) |
| Steering Column Nut | 22 N.m (16 lb ft) |
| Steering Column Tilt Wheel and Telescope Control Module Bolt | 3 N.m (27 lb in) |
| Steering Column Friction Control Module Bolt | 9 N.m (80 lb in) |
| Steering Wheel Bolt | 45 N.m (33 lb ft) |
| Steering Wheel Spoke Cover Fastener | 1 N.m (9 lb in) |
| Upper Intermediate Steering Shaft Upper Bolt@Steering Column | 50 N.m (37 lb ft) |