Removal Procedure

Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Apply a double layer of masking tape around the perimeter of the painted surfaces.
Front Wheel Opening Molding Retainer - Right Side (1) - Release [6x]
Front Wheel Opening Molding - Right Side (2) - Reposition
Disconnect the electrical connector.
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Front Wheelhouse Liner Bolt - Right Side (1) - Remove [4x]
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Front Bumper Fascia Bolt - Right Side (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Front Bumper Fascia- Right Side (1) - Reposition
Courtesy of GENERAL MOTORS COMPANY

Disconnect the electrical connector.
Release the retaining tabs.
UHF Low Energy Remote Control Access Sensor Transceiver (1) - Remove