Removal Procedure

Courtesy of GENERAL MOTORS COMPANY

Apply a double layer of masking tape around the perimeter of the painted surfaces.
Front Wheel Opening Molding Retainer (1) - Release [6x]
Front Wheel Opening Molding (2) - Reposition
Disconnect the electrical connector.
Courtesy of GENERAL MOTORS COMPANY

Front Wheelhouse Liner Bolt (1) - Remove [4x]
Courtesy of GENERAL MOTORS COMPANY

Front Bumper Fascia Bolt (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Front Bumper Fascia (1) - Reposition
Courtesy of GENERAL MOTORS COMPANY

Disconnect the electrical connector.
Release the retaining tabs.
UHF Low Energy Remote Control Access Sensor Transceiver (1) - Remove