October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Wiper Has High Speed Only

With ignition switch in "ON" position and wiper switch in "LOW" position, remove harness connector from wiper motor. Connect a jumper wire from a 12 volt source to terminal 2 of wiper motor. If wiper runs in low speed, check for an open in wire from terminal 2 to column switch. If wire is okay, replace column switch. If wiper motor did not run, check for a hung or grounded low speed brush.