October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Servo Unit
- Disconnect idle stop solenoid. With air conditioning off, adjust engine curb idle speed to 500 RPM. Shut engine off. To check bead chain slack, unsnap swivel from ball stud and pull chain tight.
- Center of swivel on chain should extend 1/8" (3.2 mm) beyond center of ball stud. To adjust bead chain slack, remove retainer from chain and swivel. Adjust chain in swivel to remove slack, and re-install retainer.