LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 1986 >> Chevette 2D Hatchback, 1.8 D >> Repair and Diagnosis >> Engine Performance >> System >> EGR System - Diesel >> Component Testing >> Control Lever Position Sensor
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Control Lever Position Sensor

  1. Connect voltmeter to "Blue/Yellow" (positive) and "Blue/Red" (ground) color coded terminals without disconnecting the control lever position sensor connector.
  2. Move control lever so clearance between control lever and idle stopper is .275" (7 mm). Control lever sensor is normal if voltage is 3.3-4.4 volts, after starting engine. If not, replace sensor.
scientia non olet · About LEMON Manuals