Alignment Specifications

WARNING: This page is about a different car, the 1987 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

WHEEL ALIGNMENT SPECIFICATIONS

Application

Specification

Caster (Degrees)

⁽¹⁾ 6 +/- 8/10

Camber (Degrees)

Front

8/10 +/- 1/2

Rear

4/10 +/- 5/10

Toe-in (Inches) ⁽²⁾

Front

0° +/- 1/10°

Rear

0° +/- 2/10°

Toe-Out on Turns (Degrees)

Inner

N/A

Outer

N/A

⁽¹⁾	Maximum side-to-side difference 1°.

⁽²⁾	Positive degrees indicate toe-in; negative degrees indicate toe-out.