Engine Compression
Models equipped with Direct Ignition Systems (DIS), disconnect battery terminal connector from coil. On other models, disconnect "BATT" terminal connector from distributor.
Check compression pressure with engine warm, all spark plugs removed and throttle valve wide open. Crank engine through 6 compression strokes before reading compression gauge.
COMPRESSION SPECIFICATIONS
| Application | Compression Ratio | |
|---|---|---|
| 1.6L (VIN 4) Carb. | 9.0:1 | |
| 1.6L (VIN 5) DOHC EFI | 9.4:1 | |
| Compression Pressure | ||
| 1.6L (VIN 4) Carb. | 130-180 psi (9-12 kg/cm2 ) | |
| 1.6L (VIN 5) DOHC EFI | 142 psi (10 kg/cm2 ) | |
| Max. Variation Between Cylinders | Less than 30%. | |