October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Spectrum Turbo
- Install Fuel Pressure Gauge (J-33945) between pressure regulator and fuel distributor pipe. Unplug VSV at connector. Start engine and measure fuel pressure under the following conditions:
- Disconnect pressure regulator vacuum hose. Plug intake manifold side of hose. Fuel pump pressure should be about 35.6 psi (2.5 kg/cm2
). Reconnect pressure regulator vacuum hose.
- Run engine at 900 RPM. Fuel pump pressure should be about 28.4 psi (2.0 kg/cm2
). Remove fuel pressure gauge. Reconnect fuel line.