October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Tach Pulse (RPM) Signal

Connect "Scan" tester to ALDL diagnostic connector. RPM should be indicated on tester when engine is cranked or running. Tach pulse (RPM reference will be indicated as a voltage signal when a DVOM (minimum 10-megohm input impedance) is touched to circuit No. 430 ECM terminal. For circuit and terminal reference, see appropriate schematic in NO START - ENGINE CRANKS OKAY in this article.