Brake Switch
WARNING: This page is about a different car, the 1995 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect brake switch 6-pin connector. Using an ohmmeter, check for continuity at brake switch. See Fig 1 . If continuity is not as specified in BRAKE SWITCH CONTINUITY tables, check brake switch adjustment. If brake switch adjustment is okay, replace defective brake switch.
BRAKE SWITCH CONTINUITY
| Brake Pedal Position | Check Between Terminal Nos. | Continuity |
|---|---|---|
| Released | 1 & 4 | Yes |
| Released | 3 & 6 | Yes |
| Released | 2 & 5 | No |
| Depressed | 1 & 4 | No |
| Depressed | 3 & 6 | No |
| Depressed | 2 & 5 | Yes |