Code 44 - Lean Exhaust Indication: Notes
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1993 Pontiac Bonneville, 1993 Oldsmobile Ninety-Eight, 1993 Oldsmobile Eighty-Eight, 1993 Buick Riviera, and 1993 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
O2 sensor acts like an open circuit and produces no voltage when exhaust temperature is less than 600°F (316°C). An open sensor circuit or cold sensor causes "open loop" operation. Code 44 will reflect a lean left O2 sensor; Code 64 will indicate a lean right O2 sensor. Perform test procedures for right or left sensor as necessary.
NOTE:
Test number refers to number on diagnostic chart.
- Checks to see if O2 sensor is registering a lean condition. Code 44 is set when O2 sensor voltage signal at control module is low (less than .3 volt) for a precalibrated period and system is operating in "closed loop".