Front Alignment Specifications

LESS HEAVY DUTY SUSPENSION
Caster Angle, Degrees
Limits +.2 to +2.2
Desired +1.2

Camber Angle, Degrees
Limits - .7 to +.7
Desired 0

Total Toe, Degrees [01]
Limits -.2 to +.2
Desired 0

Ball Joint Wear [04]


[01] Toe-In (+). Toe-Out (-).
[04] Ball joints must be replaced if any looseness is detected in joint or if seal is cut.


HEAVY DUTY SUSPENSION
Caster Angle, Degrees
Limits +.2 to +2.2
Desired 1.2

Camber Angle, Degrees
Limits - .85 to +.55
Desired -0.15

Total Toe, Degrees [01]
Limits -.2 to +.2
Desired 0

Ball Joint Wear [04]

[01] Toe-In (+). Toe-Out (-).
[04] Ball joints must be replaced if any looseness is detected in joint or if seal is cut.