Fuel Injection Lines: Removal
- Disconnect negative battery cable. Remove air cleaner, noise cover and air inlet (as equipped). Remove fuel filler cap. Open air bleed valve on top of fuel manager/filter to release any pressure in fuel supply system. Remove fuel manager/filter. Remove generator rear bracket.
- Remove EGR/boost solenoids with bracket from intake manifold studs (if equipped). Disconnect crankcase depression regulator hose at manifold. Disconnect EGR and PCV hoses (if equipped). Remove fuel line bracket and ground strap. Remove intake manifold bolts and fuel line clips. Remove intake manifold and gasket. Install Protective Covers (J-29664-1) in intake ports.
- Remove injection line clips. Disconnect and cap injection lines at injector nozzles. Do not bend injection lines. Disconnect and cap injection lines at pump. Tag injection lines for reassembly reference. Cap all openings.