LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 1996 >> Camaro Base, 2D Convertible, Standard >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Module >> Removal & Installation >> Body Control Module (BCM) >> Removal
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Body Control Module (BCM): Removal

Turn ignition switch to OFF position. Disconnect negative battery cable. Locate BCM under right side of instrument panel, mounted to HVAC duct. Remove lower instrument panel insulator. Unsnap BCM from HVAC duct bracket and lower BCM. Disconnect BCM harness connector C1, then harness connector C2. Remove BCM from vehicle.

NOTE: If BCM harness connector C2 is disconnected first, then reconnected last, no BCM DTCs will set.
NOTE: If replacing BCM with NEW BCM, program NEW BCM with PASS-Key II(R) ignition key code. See ANTI-THEFT SYSTEM article.
scientia non olet · About LEMON Manuals