CCM Programming/EEPROM Download

When CCM is replaced with a NEW CCM, EEPROM in NEW CCM must be programmed with vehicle information (options, odometer mileage, etc.). DO NOT drive vehicle more than 100 miles after installing NEW CCM without first programming EEPROM. If vehicle is driven 100 miles without first programming EEPROM, odometer mileage information will not download into EEPROM.

Interior light timer operation will be set to only 10 seconds until odometer mileage information is downloaded, vehicle is driven 16 or more miles, or TECH 1 is used to communicate with any vehicle system. Interior light operation will be normal after any of the listed conditions are met.

To program EEPROM, refer to TECH 1 scan tool instruction manual.