LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 1996 >> Corvette Base, 2D Convertible, 5.7 5 >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Central Control Module >> Self-Diagnostic System >> Entering & Exiting Diagnostics >> Automatic Diagnostic Mode
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Automatic Diagnostic Mode

  1. To enter automatic diagnostic mode, ground terminal No. 12 (Dark Blue/White wire) of Data Link Connector (DLC). Turn ignition switch to ON position. CCM will display codes and module associated with code in an automatic code display sequence. CCM is module No. 1, PCM is module No. 4, RTD is module No. 7, EBTCM is module No. 9, and DERM is module "A".
  2. During automatic display sequence each code is displayed for 3 seconds followed by a one second pause before displaying next code. A 3 second pause separates code display for each module. After each module code display, "--" will display on speedometer indicating end of display. If a communication problem exists between CCM and other modules, speedometer will display "Err".
  3. After all codes are displayed for all modules, trip monitor will display "1.0" and speedometer will be blank. CCM has now entered manual diagnostic mode.
scientia non olet · About LEMON Manuals