System Check
- Drive vehicle at greater than 25 MPH. Set cruise switch to ON. Press SET/COAST switch once and release. Remove foot from accelerator. Vehicle should maintain set speed.
- Press and hold R/A switch until vehicle speed increases by 4-5 MPH. Release R/A switch. Vehicle should accelerate and maintain the new higher set speed.
- Press and hold SET/COAST switch until vehicle speed decreases by 4-5 MPH. Release SET/COAST switch. Vehicle should decelerate and maintain new lower set speed, if speed is greater than 25 MPH.
- Press brake pedal slightly. Cruise control should disengage. Memory should remain unchanged.
- Press R/A switch once and release. Vehicle should accelerate to and maintain previous set speed.
- Press R/A switch once (tap-up) and release in less than 3/4 of a second. Vehicle speed should increase by one MPH and maintain new speed.
- Press SET/COAST switch once (tap-down) and release in less than3/4 of a second. Vehicle speed should decrease by one MPH and maintain new set speed.
- Press SET/COAST and R/A switches simultaneously. Cruse control should disengage with memory unchanged.
- Press R/A switch once and release. Vehicle should accelerate to, and maintain, previous set speed.
- Set cruise switch to OFF. Cruise control should disengage and set speed memory should be erased.