Cruise Control Module Mounting Bracket

Cruise Control Module Mounting:

REMOVE OR DISCONNECT
1. Cruise control module from mounting bracket.
2. Cruise control module mounting bracket to inner fender bolts/screws.
3. Mounting bracket by rotating it up and lifting it off of the upper diagonal brace.

INSTALL OR CONNECT
1. Cruise control mounting bracket by pushing it down on the upper diagonal brace and rotating it down to its previously installed position.
2. Cruise control module mounting bracket to inner fender bolts/screws.
Tighten
^ Bolts/screws to 6 N.m (53 lb. in.).
3. Cruise control module to mounting bracket.