Fuel Tank Pressure Sensor: Service and Repair

Fuel Sender Assembly:

REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Perform Fuel Pressure Release Procedure.
3. Drain fuel tank.
4. Remove the fuel tank.
5. Remove the electrical connector from the fuel tank pressure sensor.
6. Remove the fuel tank pressure sensor (10) from the modular fuel sender.

INSTALLATION PROCEDURE
1. Install the new fuel tank pressure sensor (10) to the modular fuel sender.
2. Install the electncal connector to the fuel tank pressure sensor.
3. Install the fuel tank.
4. Refill the fuel tank.
5. Install the negative battery cable.