Throttle Position (TP) Sensor

WARNING: This page is about a different variant/trim than selected.

NOTE: TP sensor is not adjustable unless specified otherwise. For further testing procedures, refer to TESTS W/CODES - 1.3L article.

TP SENSOR ADJUSTMENT VOLTAGE

Application

⁽¹⁾ Volts

1.3L

⁽²⁾

⁽¹⁾	Voltage range is from idle position to wide open throttle position.

⁽²⁾

Ensure engine is at normal operating temperature. Connect a DVOM (backprobe) between ground and Light Green/White wire of TP sensor. Reading should be 0.2-1.1 volts with a .140" (3.5 mm) feeler gauge placed between throttle stop screw and throttle lever. Reading should be 2.8-4.8 volts at wide open throttle. Adjust or replace as necessary.