Washer Switch Test
With washer switch in specified position, ensure continuity exists between specified wiper/washer switch terminals. See WASHER SWITCH CONTINUITY TEST table. See Fig 1 . If continuity is not as specified, replace complete wiper/washer switch assembly. See WIPER/WASHER SWITCH under REMOVAL & INSTALLATION.
WASHER SWITCH CONTINUITY TEST
| Switch Position | Terminals No. (1) | Continuity | ||
|---|---|---|---|---|
| Washer OFF | 2-11 | No | ||
| Washer ON | 2-11 | Yes | ||
|
||||