Wiper Switch Test
With wiper switch in specified position, ensure continuity exists between specified wiper/washer switch terminals. See WIPER SWITCH CONTINUITY TEST table. See Figure . If continuity is not as specified, replace complete wiper/washer switch assembly. See WIPER/WASHER SWITCH under REMOVAL & INSTALLATION.
WIPER SWITCH CONTINUITY TEST
| Switch Position | (1) Terminals No. | ||
|---|---|---|---|
| OFF | 7 & 16 | ||
| INT | 7 & 16 | ||
| LO | 7 & 17 | ||
| HI | 8 & 17 | ||
|
|||