LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 1998 >> Prizm Base, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Bleeding Brake System >> Bleeding Procedures >> ABS Auto Bleed Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ABS Auto Bleed Procedure

  1. Ensure battery is charged and no leaks are present in brake system. Raise and support vehicle. Connect scan tool to Data Link Connector (DLC). Turn ignition on. Establish communication with ABS system. Select SPECIAL FUNCTIONS, then AUTOMATED BLEED PROCEDURE.
  2. Bleed base brake system. See MANUAL BLEEDING  . Follow scan tool directions until proper brake pedal height is achieved. If bleed procedure is aborted, a malfunction exists. If a DTC is detected, see appropriate DTC test and correct malfunction. Bleed base brake system again.
  3. Repeat automated bleed procedure, until proper brake pedal height is achieved. Disconnect scan tool. Check brake fluid level and add fluid as required. Road test vehicle to ensure pedal remains high and firm. Perform DIAGNOSTIC SYSTEM CHECK  .
BRAKELINE BLEEDING SEQUENCE

Application Sequence
Prizm RR, LR, RF, LF
scientia non olet · About LEMON Manuals