Specifications Index
PRIZM SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Axle Nut/Hub Nut | 166 Ft. Lbs. 225 N.m) | ||
| Battery | CAPACITIES | ||
| Brakes | |||
| Bleeding Sequence | RR, LR, RF, LF | ||
| Disc Brakes | FRONT DISC BRAKE SPECIFICATIONS | ||
| Drum Brakes | REAR DRUM BRAKE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Charging | |||
| Generator | GENERATOR SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Drive Belts | |||
| Adjustment | BELT ADJUSTMENT | ||
| Belt Routing | SERPENTINE BELT ROUTING & ALIGNMENT -- CARS | ||
| Engine Cooling | |||
| General Service Specifications | COOLING SYSTEM SPECIFICATIONS | ||
| Radiator Cap Pressure | 13 psi | ||
| Thermostat R & I | NA | ||
| Water Pump R & I | WATER PUMP | ||
| Engine Mechanical | |||
| Compression | ENGINE COMPRESSION | ||
| Oil Pressure | With engine at normal operating temperature, oil pressure should be greater than 4.3 psi (.3 kg/cm2 ) at idle and 43-78 psi (3.0-550 kg/cm2 ) at 3000 RPM. | ||
| Overhaul | ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel/Flex Plate Torque | |||
| A/T | 61 Ft. Lbs. (83 N.m) | ||
| M/T | Step 1 - 36 Ft. Lbs. (49 N.m) Step 2 - Additional 90 Degrees |
||
| Fuel System | |||
| Pressure Specification Ignition OFF, engine ON |
44-50 psi (3.1-3.5 kg/cm2 ) | ||
| Fuel Pressure Test Procedure | FUEL SYSTEM PRESSURE TEST | ||
| Fuel Filter Location and R & I | FUEL PUMP AND FUEL FILTER ASSEMBLY REPLACEMENT (PRIZM) | ||
| Ignition | |||
| Firing Order & Cylinder Identification | See FIRING ORDER & CYLINDER IDENTIFICATION | ||
| Ignition Wires (Resistance) | 25,000 Ohms or less | ||
| Ignition Wires (Routing) | NA | ||
| Spark Plug | |||
| Type | Denso K16TR11 NGK BKR5EKB11 |
||
| Gap | .043 In. (1.1 mm) | ||
| Torque | 13 Ft. Lbs. (18 N.m) | ||
| Starting | |||
| Starter | STARTER SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel Alignment | |||
| Adjustment Specifications | WHEEL ALIGNMENT SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 76 Ft. Lbs. (103 N.m) | ||