HVAC Control Vacuum Valve Replacement

REMOVAL PROCEDURE


1. Remove the heating, ventilation and air conditioning (HVAC) control.
2. Remove the HVAC control selector switch screws.
3. Remove the HVAC control vacuum valve (3) from the selector switch.

INSTALLATION PROCEDURE


1. Install the HVAC control vacuum valve to the selector switch.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the HVAC control selector switch screws.

Tighten
Tighten the HVAC control selector switch screws to 2 N.m (18 lb in).

3. Install the HVAC control.