Cruise Control Switch: Service and Repair

REMOVAL PROCEDURE

CAUTION: Refer to SIR Caution in Service Precautions.

1. Disable the SIR system. Refer to Disabling the SIR System in SIR.
2. Remove the drivers side inflator module.
3. Remove the cluster trim plate.
4. Remove the cluster.

INSTALLATION PROCEDURE
1. Install the cruise control switch.
2. Install the cluster.
3. Install the cluster trim plate.
4. Install the drivers side inflator module.
5. Enable the SIR system. Refer to Enabling the SIR System in SIR.
6. Perform A Diagnostic System Check. Refer to A Diagnostic System Check - Cruise Control