Fuel Tank Pressure Sensor: Service and Repair

REMOVAL PROCEDURE




1. Disconnect the negative battery cable.
2. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure. Service and Repair
3. Drain the fuel tank. Refer to Fuel Tank Draining Procedure.
4. Remove the fuel tank.
5. Remove the electrical connector from the fuel tank pressure sensor.




6. Remove the fuel tank pressure sensor from the modular fuel sender.

INSTALLATION PROCEDURE




1. Install the new fuel tank pressure sensor to the modular fuel sender.




2. Install the electrical connector to the fuel tank pressure sensor.
3. Install the fuel tank.
4. Refill the fuel tank.
5. Connect the negative battery cable.