Seat Temperature Control Module: Service and Repair

Front Seat Heater Control Module Replacement

Removal Procedure

1. Remove the front seat adjuster to floor pan bolts.
2. Tilt the seat forward.




3. Disconnect the electric connectors from the heated seat module.




4. Cut the tie straps to the module.
5. Remove the heated seat module.

Installation Procedure

1. Position the heated seat module under the seat.




2. Connect the electric connectors to the heated seat module.




3. Install new tie straps to the module.

Notice: Refer to Fastener Notice in Cautions and Notices.

4. Install the front bucket seat adjuster-to-floor pan bolts.

Tighten the front bucket seat adjuster-to-floor pan bolts to 42 Nm (31 lb ft).