Air Flow Meter/Sensor: Service and Repair

REMOVAL PROCEDURE
1. Turn OFF the ignition.
2. Disconnect the Intake Air Temperature (IAT) sensor electrical connector.
3. Disconnect the MAF sensor electrical connector (1).
4. Remove the air inlet duct from the MAF sensor and the throttle body.
5. Remove the MAF sensor from the air filter housing.

INSTALLATION PROCEDURE
1. install the MAF sensor in the air filter housing.
2. Install the air inlet duct from the MAF sensor and the throttle body.
3. Connect the MAF sensor electrical connector (1).
4. Connect the Intake Air Temperature (IAT) sensor electrical connector.