September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Keyless Entry Does Not Program
- Use a known functional transmitter in order to program system. If system does not operate properly, go to next step. If system operates properly, go to step 4
.
- Turn ignition off. Disconnect Remote Control Door Lock Receiver (RCDLR). Test Pink/White wire between RCDLR and Data Link Connector (DLC) for open or short to ground. If problem was found, go to next step. If problem was not found, go to step 5
.
- Repair open or short to ground in Pink/White wire between RCDLR and DLC. After repair, go to step 6
.
- Replace inoperative transmitter. Program transmitter, see TRANSMITTER PROGRAMMING
under PROGRAMMING. Go to step 6
.
- Replace remote control door lock receiver. See REMOTE CONTROL DOOR LOCK RECEIVER
under REMOVAL & INSTALLATION. Program transmitters, see TRANSMITTER PROGRAMMING
under PROGRAMMING. Go to next step.
- Operate system to verify repair.