Powertrain Control Module: Notes
WARNING: This page does not describe the selected car, but rather 36 other vehicles, including the 2000 Saturn SW2, 2000 Saturn SL2, 2000 Saturn SL1, 2000 Saturn SL, and 2000 Saturn SC2. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Electronic components used in control systems are designed to carry very low voltages. As little as a 30-volt charge created by static electricity can cause a total or degrading failure in PCM or other electronic components containing integrated circuits. Before servicing Powertrain Control Module (PCM), technician must ground himself and the work area to discharge static electricity.
CAUTION:
Do not remove part from packaging until ready to install. Ground any static-proof package before opening. Do not touch electrical terminals of components unless properly grounded. Do not lay electrical components on car seat, carpeting or dashboard. Use electrostatic protection mat and ground strap whenever possible.
NOTE:
Before replacing PCM, carefully inspect all wiring and control components. Failure to test for short circuits may result in repeated PCM failure due to shorts. To prevent internal damage to PCM, ensure ignition is off when connecting or disconnecting PCM harness connectors or any electrical components.