LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2000 >> Venture Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Engine Control System - Removal & Installation, Overhaul) >> Computerized Engine Controls >> Powertrain Control Module >> Removal & Installation (2.2L - Saturn "L" Series)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation (2.2L - Saturn "L" Series)

WARNING: This page does not describe the selected car, but rather 36 other vehicles, including the 2000 Saturn SW2, 2000 Saturn SL2, 2000 Saturn SL1, 2000 Saturn SL, and 2000 Saturn SC2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove right side instrument panel lower dash insulator retainers. Remove right side heater outlet assembly retainer and remove outlet. Remove glove box door. Remove glove box with BCM attached. Disconnect BCM harness connectors if necessary.
  2. Remove PCM-to-bracket screws. Disconnect PCM harness connectors and remove PCM. To install, reverse removal procedure. Program replacement PCM using appropriate equipment and latest software. See COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION.