Installing Distributor When Position Has Been Lost (1.0L)
WARNING: This page does not describe the selected car, but rather 36 other vehicles, including the 2000 Saturn SW2, 2000 Saturn SL2, 2000 Saturn SL1, 2000 Saturn SL, and 2000 Saturn SC2. However, it is still accessible from the selected car via links, so may be relevant.
- Remove FI fuse from fuse and relay box. Rotate crankshaft until piston No. 1 is at TDC of compression stroke. Align timing mark on crankshaft pulley to zero position on timing cover.
- Position rotor to cylinder No. 1 position. Install distributor. Reinstall FI fuse. Ensure timing is correct. See IGNITION TIMING in appropriate ON-VEHICLE ADJUSTMENTS article.