Fastener Tightening Specifications
WARNING: This page is about a different car, the 2002 GMC Savana Special, 2002 GMC Savana Camper Special, 2002 GMC Savana, and 2002 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Auxiliary Battery Hold Down Retaining Bolt | 25 N.m | 18 lb ft |
| Auxiliary Battery Tray Retaining Bolts | 25 N.m | 18 lb ft |
| Auxiliary Generator Brace Mounting (Long) Bolts | 50 N.m | 37 lb ft |
| Auxiliary Generator Brace Mounting (Short) Bolts | 25 N.m | 18 lb ft |
| Auxiliary Positive and Negative Battery Cable Retaining Bolts to the Battery | 15 N.m | 11 lb ft |
| Battery Negative Cable Lead to Engine Block Bolt | 25 N.m | 18 lb ft |
| Battery Negative Cable Lead to Inner Fender Well Bolt | 10 N.m | 89 lb in |
| Battery Negative/ Positive Terminal Bolts | 17 N.m | 13 lb ft |
| Front Battery Hold Down Retaining Bolt | 25 N.m | 18 lb ft |
| Front Battery Tray Retaining Bolts | 25 N.m | 18 lb ft |
| Generator Brace to the Generator Bracket Retaining Bolts (4.3L, 5.0L and 5.7L) | 50 N.m | 37 lb ft |
| Generator Bracket Mounting Bolts and Nuts (4.3L, 5.0L and 5.7L) | 41 N.m | 30 lb ft |
| Generator Bracket Mounting Bolts and Nuts (8.1 L) | 50 N.m | 37 lb ft |
| Generator Bracket Mounting Bolts and Nuts (6.5L Diesel) | 50 N.m | 37 lb ft |
| Generator Front Mounting Bolts (6.5L) | 50 N.m | 37 lb ft |
| Generator Output (Bat) Terminal Nut | 18 N.m | 13 lb ft |
| Generator Pulley Retaining Nut | 75 N.m | 55 lb ft |
| Generator Rear Mounting Bolts (6.5L) | 25 N.m | 18 lb ft |
| Ignition Wire Harness to the Starter Motor Solenoid (Diesel Engines) | 6 N.m | 53 lb in |
| Ignition Wire Harness to the Starter Motor Solenoid (Gas Engines) | 2 N.m | 18 lb in |
| Oil Fill Tube Screws | 5 N.m | 44 lb in |
| Oil Fill Tube Support Bracket Bolt | 25 N.m | 18 lb ft |
| Positive Battery Cable Lead to Junction Block Retaining Nut | 10 N.m | 89 lb in |
| Positive Battery Cable to the Starter Motor Solenoid (Diesel Engines) | 16 N.m | 12 lb ft |
| Positive Battery Cable to the Starter Motor Solenoid (Gas Engines) | 10 N.m | 89 lb in |
| Starter Motor Bracket Bolt to the Engine (Diesel Engines) | 17 N.m | 13 lb ft |
| Starter Motor Field Lead Retaining Nut | 11 N.m | 97 lb in |
| Starter Motor Heat Shield Retaining Bolts | 3 N.m | 27 lb in |
| Starter Motor Heat Shield Retaining Nuts | 6 N.m | 53 lb in |
| Starter Motor Retaining Bolts to the Engine | 45 N.m | 33 lb ft |
| Starter Motor Retaining Nut to the Engine Bracket (Diesel Engines) | 10 N.m | 89 lb in |