Fastener Tightening Specifications
WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Catalytic Converter Nut | 60 N.m | 44 lb ft |
| Catalytic Converter Pipe Stud Nut | 32 N.m | 24 lb ft |
| EGR Adapter Pipe to Exhaust Manifold Bolt 3.8L | 29 N.m | 21 lb ft |
| Engine Lift Bracket Bolt/Nut | 30 N.m | 22 lb ft |
| Exhaust Crossover Pipe Bolt/Nut 3.1 L | 25 N.m | 18 lb ft |
| Exhaust Crossover Pipe Bolt/Stud 3.8L | 20 N.m | 15 lb ft |
| Exhaust Crossover Pipe Heat Shield Bolt 3.1L | 10 N.m | 89 lb in |
| Exhaust Crossover Pipe Heat Shield Nut | 20 N.m | 15 lb ft |
| Exhaust Manifold Bolt/Nut 3.8L | 30 N.m | 22 lb ft |
| Exhaust Manifold Heat Shield Bolt 3.1 L | 10 N.m | 89 lb in |
| Exhaust Manifold Heat Shield Nuts 3.8L | 20 N.m | 15 lb ft |
| Exhaust Manifold Nut 3.1 L | 16 N.m | 12 lb ft |
| Exhaust Manifold Pipe Stud Nut | 35 N.m | 26 lb ft |
| Exhaust Muffler Inlet Pipe Clamp Nuts | 50 N.m | 37 lb ft |
| Exhaust Pipe Rear Hanger Bolt | 25 N.m | 18 lb ft |
| Exhaust Tail Pipe Clamp Nut | 35 N.m | 26 lb ft |
| Fuel Injector Sight Shield Bracket Nut | 30 N.m | 22 lb ft |
| Rear Bumper Impact Bar Bolt | 25 N.m | 18 lb ft |