Scan Tool Data Definitions

COMMANDED GEN: The scan tool displays On/Off. The scan tool displays On when the module commands the generator ON.

COMMANDED STARTER: The scan tool displays Disabled/Enabled. The scan tool displays Enabled when all Starting parameters are confirmed and the PCM grounds the crank relay.

STARTER ENABLE RELAY: The scan tool displays OK/Fault. The scan tool display OK when the module receives battery positive voltage on the CRANK relay control circuit or the ignition is in the START position.

VTD FUEL DISABLE: The scan tool displays Active/Inactive. The scan tool displays Inactive unless the Vehicle Theft Deterrent (VTD) has been activated.