LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2001 >> Cavalier LS, 2.4 T >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control Modules >> Programming >> Powertrain Control Module Programming
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Powertrain Control Module Programming

WARNING: If Powertrain Control Module (PCM) was replaced, EEPROM in PCM must be programmed. If EEPROM is not programmed, a Diagnostic Trouble Code (DTC) will be set in PCM, or PCM may be damaged.

Powertrain Control Module (PCM) can only be programmed using pass-through programming method. Pass-through programming method requires use of a scan tool in series with Techline(R) terminal and Data Link Connector (DLC). Perform EEPROM programming using Techline equipment manufacturer's instructions and latest software applicable for vehicle model.

Once EEPROM is reprogrammed, Crankshaft Position (CKP) sensor variation learn procedure must be performed using proper procedure. On 2001 models, see COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION. On 2002 models, see COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION. Program theft deterrent system. See PASSLOCK(tm) LEARN PROCEDURE  .

scientia non olet · About LEMON Manuals