Installation Procedure
- Install the regulator to the door.
- Install the bolts to the window regulator. Tighten the bolts to 9 N.m (80 lb in).
- Align the window to the regulator and install the bolts holding the window to the regulator. Tighten the bolts to 9 N.m (80 lb in).
- Connect the wiring harness to the window motor assembly.
- Install the water deflector. Refer to Water Deflector Replacement - Front Door .
- Install the trim panel. Refer to Trim Panel Replacement - Side Front Door .
- Lower the window. Inspect the window operation.